Errors and what they mean
A schedule in trouble shows a message in the list and at the top of the editor. Administrators also see it under Schedules in error.
How failures are handled
- If creating an issue fails, RepeatWise retries after 5 minutes, then 15, then 60. The schedule stays Active with the warning “Attempt n of 4 failed; next attempt at …”.
- After 4 failed attempts the occurrence is Failed and the schedule goes to Error and stops.
- Before a retry, RepeatWise searches Jira for an issue it may already have created, so a retry does not make duplicates.
- If Jira’s answer to a create is lost (Jira unavailable, timeout, network error), the issue may exist even though Jira’s search does not show it yet. RepeatWise never sends that create again: it only looks for the issue, 5, 10 and 15 minutes later (“not confirmed yet, check 1 of 3”). If it finds it, the run continues as usual. If not, the run fails with “RepeatWise sent the issue at time but could not confirm it was created. Check the project; if it is not there, use Run now to create it.”, the schedule goes to Error and the owner is notified. Look for the issue in the project around that time; if it is not there, use Run now on the schedule page (or create it by hand), then save the schedule to resume it. Sub-tasks follow the same rule. When Jira clearly refuses a create (for example a required field), the normal retries apply.
- If Jira rate-limits (429), the retry waits for the time Jira asks.
Catch-up window
If an issue is due but could not be created (downtime, retries), it is still created late, up to the catch-up window (default 24 hours, 0 to 72 in Administration). Older ones are skipped and logged as “Not created in time”. An issue whose first attempt failed keeps being retried for at least 3 hours, even with a smaller window; if its retries still cannot run in time (a long outage), the schedule shows an error so you know. Issues created more than 15 minutes late are labelled “Created late” in the log. One late occurrence is caught up per run (every 5 minutes).
Inactive license
When the app license is inactive, scheduled creation pauses. Schedules and history remain available for reading and editing. Once the license becomes active, runs resume, but issues planned during the inactive period are not created later. The log shows them as skipped, or as failed if an attempt was already in progress, with the reason “Not created: the app license was inactive when this occurrence was planned.”.
Messages
| Message | Meaning | What to do | |—|—|—| | RepeatWise cannot act as the schedule owner: the owner may be deactivated or may no longer have access to the app. | Owner cannot be used to create issues. | An administrator reassigns the owner. | | The schedule owner lacks the “Create issues” permission in the target project. | Permission removed. | Restore it or reassign the owner. | | The schedule owner cannot search issues in the target project. | Needed for the duplicate check on retries. | Give the owner “Browse projects”. | | The target project or issue type no longer exists, or the schedule owner cannot see the project. | Not found (404). | Restore access, or create a new schedule. | | The target project no longer exists, is archived, or the schedule owner cannot see it. | Project gone. | Same. | | The issue type of the template no longer exists in the target project. | Issue type removed. | Recreate it or edit the schedule. | | Jira rejected the issue, for example because a field is now required. (Jira’s own text follows.) | Field rules changed. | Make the field optional or give it a default, then save. | | Jira rejected the issue because of: Priority (or another field). A value chosen in the schedule may no longer exist… (Jira’s own text follows, in your site’s language.) | A value the schedule uses was deleted, renamed or archived in the project, or the field became required. | Edit the schedule, check the fields named, save. | | Warning: created without its components (or fix versions): Jira refused them… | A component or version the schedule uses was deleted or archived in the project. The issue was still created, without it. | Edit the schedule and choose the components or versions again. | | Atlassian API rate limit reached (HTTP 429). | Too many calls. | Nothing: retried automatically. | | Jira is unavailable (HTTP 5xx). | Jira outage. | Nothing: retried automatically. | | The previous issue was not found, or the schedule owner cannot see it. | The previous issue was deleted or hidden. Shown as a warning; the new issue is still created. | Restore the owner’s access if you want the chaining option to work. | | Jira rejected the comment or transition on the previous issue, for example because the transition is no longer available. | The workflow changed. Shown as a warning; the new issue is still created. | Pick a transition that is available, then save. | | The board or sprint was not found, or the schedule owner cannot see it. | Sprint step failed. Shown as a warning; the new issue is kept. | Restore the owner’s access or pick another board. | | The schedule owner cannot see the board or add issues to its sprints. | Sprint step failed. Shown as a warning; the new issue is kept. | Give the owner access to the board, then save. | | The board has no sprints (a Kanban board, or a team-managed board with sprints turned off), or Jira rejected the sprint request. | Sprint step failed. Shown as a warning; the new issue is kept. | Pick a board with sprints, or turn sprints on. | | The issue types of the target project cannot be read. The project may be gone, or the schedule owner cannot see it. | Sub-tasks cannot be created. | Restore access, then save. | | The target project has no sub-task issue type available. | Sub-tasks cannot be created. | Add a sub-task issue type to the project, then save. | | Skipped: the previous issue KEY-123 is still open. | The schedule is set to skip when the previous issue is open. | Nothing. Close the previous issue to create the next one. | | Parent KEY-123 created, but the progress of its sub-tasks, sprint and chaining steps cannot be read. (Also: “… could not be read after 4 tries.”) | RepeatWise could not read its own progress record. | Check KEY-123 in Jira, then save the schedule to restart it. | | The issue planned for (date) was not created: RepeatWise could not read the progress of this occurrence after 4 tries. | Same, before any issue was created. | If Jira has an issue for it, keep it. Then save the schedule to restart it. | | The previous attempts were interrupted before they finished. | An attempt stopped part way. | Check the issue in Jira, then save the schedule. | | Not created: the previous attempts were interrupted before Jira answered. | An attempt stopped before Jira replied. | Check Jira for the issue; save the schedule if needed. | | The issue template of this schedule is missing or cannot be read. / The schedule data cannot be read. | Stored data problem. | Edit the schedule and save it again. | | RepeatWise sent the issue at (time) but could not confirm it was created. Check the project; if it is not there, use Run now to create it. | Jira’s answer to the create was lost and the issue was not found after 3 checks. Never sent twice automatically. | Look for the issue in the project; if it is missing, use Run now (or create it by hand), then save the schedule. | | RepeatWise sent sub-task n at (time) but could not confirm it was created. Check KEY-123 before creating it by hand. | Same, for a sub-task. The parent and the other sub-tasks are kept. | Check KEY-123’s sub-tasks; add the missing one by hand if needed, then save the schedule. | | Jira did not return the key of the created issue. / RepeatWise hit an internal error while creating the issue. | Unexpected answer or error. A create without a key is checked like a lost answer. | Retried; save the schedule if it persists. | | Unexpected error … | Anything else. | Retry by saving the schedule; contact support if it persists. |
Other messages:
- “Only the owner of this schedule or a Jira administrator can change it.”
- “You do not have the “Create issues” permission in project X.”
- “The project of a schedule cannot be changed. Create a new schedule instead.”
- “This issue has a security level. RepeatWise can’t copy restricted issues into a schedule that everyone in the project can see.” (Make this issue recurring, or the link to the source issue, on an issue with an issue security level: a schedule is visible to everyone who can see its project. Create the schedule by hand without the restricted content.)
- “No occurrence was found in the next 10 years. Check the rule and dates.”
- “The new owner does not have the “Create issues” permission in project X.”
- “schedule changed” (a waiting occurrence no longer matches the edited rule and is failed, not created).
Warnings
Some steps come after the new issue exists: the comment or transition on the previous issue, adding to a sprint. If one fails, the new issue is kept. The schedule keeps running and shows “Created with a warning”. The occurrence log shows the text, which starts with “Warning:”. A later clean occurrence clears the warning.
If a sub-task cannot be created after the retries, the new issue and any sub-tasks already created are kept. The occurrence log shows the reason and the schedule goes to Error. Fix the cause, then save the schedule.
Owner notification
When a schedule stops (status Error), Jira notifies its owner: the subject is “RepeatWise:
- It is a Jira notification about the last issue the schedule created, sent by Jira to the owner only (not to the reporter, assignee, watchers or voters). Jira delivers it by email.
- Once per failure: one notification until the owner saves, resumes or reassigns the schedule. At most one per schedule per 24 hours.
- A schedule that never created an issue cannot be notified this way: the warning in the app is the only signal.
- A failed Run now does not notify: the result is shown on screen.
- The schedule page shows “The owner was notified on
" under the error. - If the owner cannot see the issue any more (for example, they lost access to the project), Jira may not deliver the notification. Administrators can still see the schedule under Schedules in error.
- A Jira administrator can turn this off in Administration (“Email owners when a schedule fails”).
Restarting a stopped schedule
Fix the cause, then open the schedule and Save. It restarts from now. Stopped schedules are also listed on the administration page.
While RepeatWise is still checking whether an issue it sent was created (Jira did not answer clearly, at most about 30 minutes), the schedule cannot be deleted: “RepeatWise is still checking whether the last issue of this schedule was created”. Pause it now if needed, and delete it once the check is over. Deleting it earlier would erase what the check needs.